All models are CO2 powered and are built on .68 caliber paintball marker platform with additional components that meet the visual requirements of the objective force.

The Alpha Black is equipped with a collapsible M16 style telescopic rear stock with 6 adjustable positions.

Alpha Black Standard Issue:

• 11″ Quick thread anodized barrel
• M16 Style shroud w/built in sight
• M16 Style collapsible stock
• Semi-automatic, .68 caliber
• Magazine with built in storage

Maintenance Pack Includes:

• Allen wrench set
• Spare tank o-ring
• Marker lubricant
• Cleaning cable and barrel sleeve

*Alpha Black is also available with a camo finish option.

Ammunition:

• .68 Cal. Standard Paintball
• .68 Cal. Hard Rubber Ball (Riot Control)
• .68 Cal. Pepperball

NOTE: All original AT-4 control systems (retractable shoulder mount, device cocking lever, safety unlock, triggering/firing mechanisms, and sighting devices) are intact and function as per original AT-4 firing procedures and operating protocol.

The shoulder mounted AT4-S device propels a 6oz. Fragmentation projectile up to 100+ yards. The AT4-S maintains a minimal drop from horizontal trajectory, and provides for a 10+ foot diameter down range effected/marked acquisition, while employing a maximum operating pressure of 250psi.

The AT4-S’s interior components are constructed of all steel & aluminum and consists of a cannon and receiver assembly, expansion chamber assembly, micro-gas valve system assembly, and control systems assemblies.

Loading the AT4-S launcher is completed through the use of a 1/4 turn snap pin locking cannon assembly.
The AT4-S uses a single round chambering process by way of a counterclockwise 1/4 turn rotating cannon/barrel assembly which allows the cannon to be removed from the receiver. To re-seat the cannon into the receiver after chambering a round at the breach end of the cannon/barrel, simply reinsert the cannon into the receiver assembly and rotate the cannon clockwise 1/4 turn.

Ammunition for the model AT4-S shoulder mounted launch system consists of liquid marking paint, or other liquid fills as per specifications of operational task objectives.
Liquid fills are contained in a thin walled bladder, encased in a destructible (Soldier Safe) papier-mâché shell casing. Rounds are impact detonated causing casualties through direct fragmentation effect.

The cannon assembly consists of the barrel, CO2 expansion chamber, breech door assembly and barrel to pedestal mounting brackets. The pedestal consists of the cannon support system, gear or lever driven elevation assembly, traverse system and locking breech door assembly.

The firing platform consists of steel, C-channel, 2-wheel, trailer type framework with expanded metal deck. The trailer tongue has a dual-purpose design allowing stabilized positioning through the use of a spreadable land anchor configuration.

The Howitzer marker device presents a shipping weight of approximately 400 lbs., and is painted with OD non-reflective paint.

The ammunition for the Howitzer marker system consists of 20 oz. of liquid fill contained in a latex surgical tubing bladder encased in a cardboard and urethane cast shell casing.
The round is impact-detonated causing simulated casualties through fragmentation effects.

All models are CO2 powered and are built on .68 caliber paintball marker platforms with additional components that meet the visual requirements of the objective force.

The Project Salvo is equipped with a collapsible AR15 style 6 position folding stock.

Project Salvo Standard Issue:

Maintenance Pack Includes:

Ammunition:

Specifications:

• 62 mm
• Smooth bore
• Muzzle loading
• Gas/Co2 operated
• Manually-fired
• High angle-of-fire
• Maximum operating pressure of 200 psi

Capabilities:

• 4 round per minute firing cycle
• 500 yard effective range
• 70 foot diameter “kill zone”

Technical Specifications:

• Under-slung paintball marker system
• 47mm
• Smoothbore
• Breech loading
• Gas/Co2 operated
• Manually-fed

Capabilities:

• The device propels a 3-5 oz. fragmentation marker or crowd controlling round
• 6 round/minute firing cycle rate.
• 70+ yard effective range with standard grenade ammunition
• 100+ yard range using ballistic ammunition
• 20+ foot diameter down range “kill zone”
• Maximum operating pressure of 250 psi

The SSB-24A vest is designed to be worn underneath a concealment garment that can be altered or changed to fit the operational requirements of the exercise and also eliminate the “brown coat” syndrome.

The unit can be deployed in multiple scenarios through the use of individual Adapter Kits. The Adapter Kits modify the configuration of the device to fit unique operational tasks and different training scenarios where roadside IED’s, mobile attack vehicles, or other types of real world encounters where IED’s are a threat.

The individual CB-32A kits are suited to be installed on location (below ground, vehicle implants, etc) temporarily or permanently if required.